You have 0 items in your cart.
Fluke
Sub Categories
Category:
Batteries, Charges and Adapters
Mains (Line Voltage) - BC190/801 (Europe) 230V ± 10% - BC190/803 (North America) 120V ± 10% - BC190/804 (United Kingdom) 230V ± 10% - BC190/806 (Japan) 100V ± 10% - BC190/807 (Australia) 230V ± 10% - BC190/808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included)
Category:
Batteries, Charges and Adapters
7.5V dc battery eliminator for operation of calibrator from 120 volt AC line UL/CSA recognized For use in North America; 120V ac 60 Hz lines 3.8" x 2.5" x 2.2" (96 mm x 63 mm x 56 mm); 72" (1.8m) cord Weight: 1 lb/0.5 kg One year warranty
Category:
Batteries, Charges and Adapters
Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included
Category:
Batteries, Charges and Adapters
Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included
Category:
Batteries, Charges and Adapters
For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR
Category:
Batteries, Charges and Adapters
Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC. Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters. Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration Transfer rate: up to 57k6 Baud
Category:
Batteries, Charges and Adapters
Stray voltage can appear in electrical installations, due to the capacity between wires This may result in erroneous readings on high impedance meters The SV225 solves this without compromising safety On energized wires, the meter will indicate the real voltage On non-energized circuits the meter will read close to zero (even if there are stray voltages) It can be used with all modern meters with standard input spacing. Rated CAT III 1000V, CAT IV 600 V
Category:
Benchtop Multimeters
5.5 digit resolution Dual Display Measures V dc/ac, I dc/ac, Ω, Freq, Continuity, Diode Basic V dc accuracy of up to 0.015% Min, Max, Rel, dB, dBm 2x4 Wire Ohms measurement technique Dedicated dc leakage current ranges Six dedicated buttons for fast access to instrument setups Hi/Lo limit compare for Pass/Fail testing