Non-Metallic Contact 70V to 1000V Phase Detector
Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model 3129-10 is a non-contact phase detector that detects the phase of electrical current flow within insulated wires without the use of metallic contact voltage clips.
• Rotating LED indicator indicates the phase sequence for a 3-phase power supply at a glance
• Intermittent beeps signal positive phase; continuous tone signals reverse phase
• Magnetic base lets you secure the phase detector on a distribution panel
• Simply clip clamps onto wire insulation
<Compatible wires>
IV cable: 14 mm^2 to 500 mm^2, single wire 5 mm to CV cable: 3.5 mm^2 to 500 mm^2
■ Basic specifications
Functions | Phase detection (positive and negative) |
---|---|
Voltage detection method | Static induction |
Voltage range | 70 to 1000 V AC (50/60 Hz) (sine wave,continuous input) |
Frequency range | 45 Hz to 66 Hz |
Object to be connected | 7 mm (0.28 in) to 40 mm (1.57 in) of insulated wiring IV, HIV cable: 14 to 500 mm^2 CV cable: 3.5 to 500 mm^2 |
Display | Phase detection : Positive ; 4 LEDs lit in clockwise order and the buzzer sounds intermittently Negative ; 4 LEDs lit in counterclockwise order and the buzzer sounds continuously |
Battery check function | Power ON lamp: lights up (Power ON), blinks (Battery LOW) |
Auto power off | Auto shut off if no activity is detected after power is turned ON for 15 minutes |
Power supply | R6P (AA) manganese battery ×2, Continuous use: 70 hr |
Dimensions and mass | 70 mm (2.76 in) W × 75 mm (2.95 in) H × 30 mm (1.18 in) D, 240 g (8.5 oz), Cord length : 0.7 m (2.30 ft) |
Accessories | Carrying case ×1, Strap ×1, Spiral tube ×1, Instruction manual ×1, R6P (AA) manganese battery ×2 |