Water

Water is a chemical compound with the chemical formula H2O. A water molecule contains one oxygen and two hydrogen atoms connected by covalent bonds. Water is a liquid at standard ambient temperature and pressure, but it often co-exists on Earth with its solid state, ice, and gaseous state (water vapor or steam). Water also exists in a liquid crystal state near hydrophilic surfaces.

 
  • Filter
Category: Sludge Judge

Sludge Samplers for taking accurate readings of settled solids.

Feature Microprocessor based for fast and accurate measurements. Special viewing angle designed of waterproof housing IP 57 rated. It floats on water. Large LCD display pH or ORP or Conductivity or TDS or Salinity or DO and Temperature Simultaneously. Simple to calibrate by one keyboard and automatic temperature compensation(ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation. Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree ℃/℉ are switchable. Low battery and consumption indicator. Auto power shut off after 10 minutes of non use. Easy to replace electrode module, and the type of electrode would be recognized automatically and shown in display during insertion. Specifications     7200 7011 7021   pH mV Temp.  Cond. TDS Salt Temp. Range  -2 ~ 16.00  -1000 ~ 1000  0 ~ 90 ℃  0 ~ 2000 μS  2.00~20.00 mS  0 ~ 1300 ppm  1.30 ~ 13.00 ppt  0 ~1000 ppm  1.00 ~ 12.00 ppt  0 ~ 90 ℃ Accuracy  ± 0.01 + 1digit  ±2 + 1digit  ± 0.2 + 1digit ± 2% FS ( Cond., TDS, Salt)  ± 0.2 ℃ +...

Category: Chlorine

Features: Microprocessor based for fast and accurate measurements. EPA approved DPD method. Large LCD 45 x 25 mm display for reading convenient. Memory function stores and recalls up to 150 points. Low battery alarm and auto shut off after 10 minutes of non use.  Specifications:   Range 0 ~ 3.50 ppm Resolution 0.01 ppm Accuracy ± 0.03 + 1 digit at<2.00 ppm ± 3% FS + 1 digit at>2.00 ppm Response <5 seconds Operating 0 ~ 50 ℃, <85% RH Sample 10 ml Data memory Storage /recall up to 150 points Power DC 1.5V (UM4, AAA) battery x 4 Dimension Meter: 70 x 135 x 65 mm Weight Meter: 168 g(including battery)   Accessories: FCL Reagent strip x 50 pcs(DPD-1)  TCL Reagent strip x 50 pcs (DPD-4) Glass testing bottle x 3 Distilled water x 50 ml Clean cloth x 1 Cup x 1 Battery Carrying case

Category: pH Meters

Microprocessor based with splash proof housing. Large LCD built into adjustable "flip-up" cover. Simultaneous display pH and Temperature. Rugged design for handheld or bench top use, neckstrap for "hands-free" operation. Automatic or manual temperature compensation. °C/°F switchable Simple to calibrate by one keyboard for 5 points buffer, calibration value can be adjusted as needed. Indicate percentage of slope (PTS) after calibration. Low battery and consumption indicator. Auto shut off after 10 minutes of non use.

Category: pH Meters

Features: Fast response combined with High Accuracy. Lightweight and compact. Splash-proof membrane keypad. Electrode can be extended up to 80mm. Pocket clip moulded on the rear of the case.  Specifications:   PH5011 PH5011A COND5021 COND5022 TDS5031 TDS5032 ORP5041 EC5061 Type: pH Conductivity TDS ORP EC Range: 0-14.0 0-14.00 0-19990μS 0-1999μS 0-19990 ppm 0-1999 ppm ±1999 mV 0-20.0 EC Accuracy: ±0.1+1 digit ±0.01+1 digit ±1%FS ±1%FS ±1%FS ±1%FS ±2%FS ±1%FS Resolution: 0.1pH 0.01 10 1 10 1 1 0.1 ATC NO YES YES YES YES YES N/A YES Battery: 9V 1.5Vx3(or 9V) 9V Dimensions: Meter:158 x 40 x 34 mm, Carrying case: 165 x 100 x 40 mm Weight: Meter: 85 g(w/o battery) complete kit: 250 g   Accessories for complete kit: Standard solution Battery Screwdriver Carrying case Instruction manual