FEATURES ● High contrast OLED display● Microprocessor-controlled● Tests insulation resistance up to 10 TΩ● 4 Insulation test voltages: 500V, 1000V, 2500V, 5000V● AC / DC Voltmeter (30~600V)● Short-circuit current up to 5mA● PI (Polarization Index) indication● DAR (Dielectric Absorption Ratio) indication● Auto-ranging on all insulation ranges● Optical USB to RS-232 data transmission● Well isolated from contact● Well protected from surges● 2 built-in optical LEDs for data transfer● Visual and audio warning of external voltage presence (≥30Vac or ≥30Vdc)● Auto-hold function to freeze reading● Overload protection● Adjustable testing duration: 1~30 minutes● Internal memory for data storage● Displays testing duration for insulation measurement● Auto-off function● 200 measurement results can be saved in memory and recalled on display
FEATURES ● Microprocessor-controlled.● Four insulation test voltages.● Insulation resistance; auto ranging on all ranges.● Bargraph indicates test voltage; rise and decay can be observed during tests.● Visual and audible warning if external voltage is present.● Fully protected: crow bar.● Carry case.● EEPROM calibration. SPECIFICATIONS Test voltage (DC V) 0.5kV / 1kV / 2.5kV / 5kV Measuring ranges (Auto-Ranges) 0-25GΩ / 0-50GΩ / 0-125GΩ / 0-250GΩ Accuracy ±3% rdg Output power limit 50uA to 100uA (1W) Live warning > 500V AC Operation temperature 0°C to 40°C Operation-humidity 85% Max. relative humidity Dimensions 330(L) × 260(W) × 160(D)mm Weight (battery included) Approx. 3500g Power source 1.5V “C”× 8 Alkaline batteries Safety standard EN 61010-1 EN 61326-1
FEATURES ● Microprocessor-controlled.● Four insulation test voltages.● Insulation resistance; auto ranging on all ranges.● Bargraph indicates test voltage; rise and decay can be observed during tests.● Visual and audible warning if external voltage is present.● EnerSave™ feature to extend battery life.● 2 Lines × 16 characters large LCD.● Low battery consumption.● Low battery indicator.● Overload protection.● Auto-off.● Show test time duration (up to 99.9s) for easy comparison.● EEPROM calibration.● Built-in carry case and test leads in separate pouch. SPECIFICATIONS Test voltage (DC V) 0.5kV / 1kV / 2.5kV / 5kV Measuring ranges (Auto-Ranges) 0-25GΩ / 0-50GΩ / 0-125GΩ / 0-250GΩ Accuracy 0-50GΩ : ±3% rdg 50-250GΩ : ±5% rdg Dimensions 170(L) × 120(W) × 95(D)mm Weight (battery included) Approx. 930g Power source 1.5V(AA) × 8 Safety standard EN 61010-1 EN...
● Microprocessor-controlled. ● Indicates phase rotation. ● Indicates phase presence. ● Tests for disconnection sensitivity. ● Indicates battery status. ● Tests for disconnection time. ● Measures voltage phase to earth. ● Select one of 3 Phase to test ELCB. ● Color-coded test leads. ● Phase presence indication from as low as 100Vac. ● Very low consumption. ● Fused earth leakage tester. ● ELCB works 50Vac to 330Vac 50Hz / 60Hz. ● Led indication of Voltage on ELCB. ● Phase rotation and presence does not require battery to indicate. ● EN 61010-1 CAT III 550V. EN 61326-1
● Microprocessor technology ensures high performance accuracy and reliability. ● Fully programmable via tactile key pad. ● Direct readout of disconnection, time or current. ● Voltage measured during test. ● Housed in a heavy duty carry case. ● Suitable for all industrial, mining and domestic environments. ● Display can be customized for special orders. ● Indicate voltage and trip Current/Time. ● Use binary principle. ● True resistor switching.
● Microprocessor-controlled. ● Operating voltage 100-450V L-E. ● Rated current 999mA, at 317V AC/50Hz. ● Checks ELCB trip time and trip point (sensitivity). ● Auto off and auto ranging. ● Phase angle selection(0° / 180°). ● Indicates tripping phase angle. ● Impact resistant enclosure. ● Over temperature shut-down. ● Transient protection. ● Suitable for heavy industrial use. ● Fused.
● Microprocessor-controlled. ● 2 Lines × 16 characters LCD. ● Very low consumption. ● Suitable for domestic version. ● Better than 3% accuracy (current). ● Menu-driven. ● Accurate digital readout of disconnection time. ● Accurate digital readout of disconnection sensitivity. ● Automatic data hold function. ● Zero crossing circuitry permit testing at 0° or 180°. ● Disconnection phase polarity shown on LCD display. ● Auto off and off override. ● Polarity trip indicator (positive or negative phase) ● Wiring polarity indicator. ● Measure voltage between Line and Earth before testing. ● 60Hz available.
● Microprocessor-controlled. ● 2Lines × 16 Characters LCD. ● Very low consumption. ● Menu-driven. ● Accurate digital readout of disconnection time. ● Automatic data hold function. ● Zero Crossing Circuitry permit testing at 0° or 180°. ● Disconnection Phase Polarity shown on LCD display. ● Auto-off and off override. ● Polarity Trip indicator (Positive of Negative Phase). ● Wiring polarity indicator. ● Measure voltage and frequency between Line and Earth before testing.