You have 0 items in your cart.
By Brands
Brands
Sub Categories
Category:
Digital Multimeters
FEATURES ● 4000 counts LCD with a maximum display of 3999.● Angled display design helps the user to identify the reading of value easier.● Auto ranging designed.● Range change function.● Continuity check.● Diode measurement.● Data hold function.● Low battery indication.● Over range indication.● Fuse protection.● Special hook design used to hang the meter for ease of use. SPECIFICATIONS DC Voltage Ranges Resolution Accuracy Input protection 400.0mV 100μV ±(0.5%rdg+3dgt) 1000V DC 4.000V 1mV 40.00V 10mV 400.0V 100mV 1000V 1V ․Input impedance : 10MΩ AC Voltage Ranges Resolution Accuracy Input protection 400.0mV 100μV ±(1%rdg+5dgt) 800V AC 4.000V 1mV 40.00V 10mV 400.0V 100mV 750V 1V ․Input impedance : 10MΩ DC...
Category:
Populated Board Testing
Data Creation System Delivers 90% Faster Data Generation, 93% Lower Line Stoppage Times The UA1780 enables high-quality test programs in a short period of time by using net information that has been reverse-generated from Gerber data and component information libraries, and delivers maximum performance when used in conjunction with Hioki’s new FA1240-50 flying probe tester.
Category:
Analogue Insulation / Continuity Tester
The Model 3131A offers unmatched performance, and feature including test lead resistance zero adjustment for time-saving continuous operation, a clear ease to read illuminated scale, and a live circuit warning. • Test insulation up to 100MΩ at 250V, 200MΩ at 500V, 400MΩ at 1000V and continuity up to 20Ω. • LIVE circuit warning lamp plus audible warning. • Automatic discharge of circuit capacitance when TEST button is released. • Fuse protected (continuity range only). • Battery check LED. • Front panel zero adjust. • Back light function to facilitate working at dimly lit situations. • PRESS TO TEST button with lock down feature.
Category:
Interface Cables
The BTIF1000* is a data logger accessory which adds Bluetooth® wireless capabilities to the PRTemp1000, PRTrans1000, Temp1000, RHTemp1000, Temp1000P, Temp1000S and Temp1000FP data loggers. The BTIF1000 is designed to replace the IFC110 or IFC200 with a high-speed secure wireless link. This enables wireless in-the-field downloading using MadgeTechs new Pocket PC software. It is fully Bluetooth® qualified and has a modular FCC approval (contains FCC IDQOQWT12). The BTIF1000 is equipped with one button operation making downloading and restarting easy. It is rated IP67, so it can be used in wet or underwater environments. *This device is not for use with intrinsically safe data loggers.
Category:
AC Clamp Meters
FEATURES ● Full auto range for V.A and Ω functions. ● Data hold function freezes the reading in dimly lit or hard to reach places. ● Low battery indication. ● Built-in buzzer for continuity test.● Safety design throughout with no exposed metal parts. Shielded banana plugs and recessed input terminals.● Ohm function ideal for checking continuity of relays transformers and motor coils. SPECIFICATIONS AC A 400A ±(2.0%rdg+3dgt) : 50/60Hz AC V 400 / 600V ±(1.2%rdg+3dgt) : 40-500Hz Ω 4kΩ ±(1.5%rdg+3dgt) Buzzer sounds < 100Ω Conductor size 27mm Max. Low battery Indication Dimensions 197(L) × 65(W) × 33(D)mm Weight (battery Included) Approx. 250g Power source 9V(6F22) × 1 Safety standard EN 61010-1 CAT II 600V EN 61010-2-32
3-Axis Magnetic Field Testing According to IEC 62110/IEEE 644, IEC 62233 and ICNIRP 2010 Guidelines Hioki magnetic field testers are designed to measure magnetic flux density and level of magnetic field exposure, and can be used to assess conformance to ICNIRP 2010 and IEC/EN62233 and in research on magnetic field exposure. The FT3470-52 measures magnetic flux density and magnetic field exposure generated by products manufactured at a customer site or produced by devices in a customer environment, and comes bundled with 2 sensors.
Category:
Phase Sequence Indicators (Contact Type)
FEATURES ● Two functions in one unit: open phase and phase sequence detection.● Lamps let you determine at-a-glance if phase is open.● Large size alligator clips for easy clipping onto switch-boards terminals.● Checks a wide range of 3-phase power sources.● Special test leads length are available on request.● Push button switch is designed to minimize damage due to negligence. SPECIFICATIONS Voltage 90V-600V AC Frequency response 50 / 60 Hz Operating temperature & humidity 0°C ~ 40°C at 80% Max. relative humidity Storage temperature & humidity -10°C ~ 50°C at 90% Max. relative humidity Cord 1.1m each of red(R), white(S) and black(T) cord Dimensions 134(L) × 85(W) × 45(D)mm Weight Approx. 510g Safety standard IEC 1010 CAT II 600V
Immersion/Drop-In Type DO Holder OC-711 / OC-950 Lightweight PVC holder; length of immersion type holder: 0.3 - 3.5 m, length of stainless steel protection pipe for drop-in type holder: 2 - 6 m Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste)