You have 0 items in your cart.
DKK-TOA
Sub Categories
Electromagnetic Concentration Transmitter MBM-162 （4-wire） Electromagnetic concentration analyzer for field installation in a compact aluminum diecast enclosure Conductivity of NaCl, HCl, H2SO4, etc. are measured and converted to concentration (％) data automatically 2-point contact signal, 2-channel output including temperature (RS-232 optional) Examples of measurement ranges NaCl: 0～10% HCl: 30～40% H2SO4: 93～99.5% NaOH: 0～15%
Electromagnetic Conductivity Transmitter MBM-160（4-wire） Electromagnetic conductivity analyzer for field installation in a compact aluminum diecast enclosure Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) 2-point contact signal, 2-channel output including temperature (RS-232 optional) Power source: 90 - 264VAC, 50/60Hz Meas. range Minimum: 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm
Panel Type Electromagnetic Concentration Analyzer MBM-102A Compact DIN 96 size Conductivity of NaCl, HCl, H2SO4, etc. are measured and converted to concentration (％) data automatically Assignable measurement range 2-point contact signal, 4 - 20mA output (RS-232 optional) Examples of measurement ranges NaCl: 0 - 10％ HCl: 30 - 40％ H2SO4: 93 - 99.5％ NaOH: 0 - 15％
Panel Type Electromagnetic Conductivity Analyzer MBM-100A Compact DIN 96 size Accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) 2-point contact signal, 4 - 20mA output (RS-232 optional) Meas. range Minimum : 0 - 2 mS/cm Maximum: 0 - 2000 mS/cm
pH Meter with Auto Calibration MAC-355 Automatic cleaning and 2-point calibration functions serve long-term reliable pH measurement with just little maintenance Lift-up type design incorporated with air jet cleaning allows for superior cleaning effect and stable measurement Self-diagnosis and useful message display Meas. range pH： -1 - 15
Electrode Holder with Lift Up Type Jet Cleaner LHC-7D A detector which can lift up from the sample water and remove fouling from the pH/ORP electrode effectively. Automatic cleaning system that applies alternate streams of wash water and chemical solution (such as a 5% hydrochloric acid solution) to clean the pH/ORP detector.
Detector with Water Jet Cleaner JOC-711C / JOC-950C Cleaning electrode contamination by jetting water or air onto the electrode Immersion type (JOC-711C) and drop-in type (JOC-950C) Electrode: polarograph type 7533L (for standard use) or 7536L (for human waste)
Immersion Type Detector with Water Jet Cleaner JHC-7C/JHC-8C Detectors composed of holder and water-jet cleaner: Immersion type(JHC-7C) and flow-through type(JHC-8C) By spraying water onto the tip of electrode, the water pressure washes fouling away One-touch detachable holder and easy maintenance Simple installation with a sensor, timer&electromagnetic valve integrated unit