THR1100A-S3.V2 3-ZONE MOST BASIC WALK-THRU METAL DETECTOR WITH TOP LED LIGHT
CE Mark, 3 MultiZone, Detects ECAC threat objects,10 security Level, IR Pass Sensor On‐Off
Selection, One way passenger counter.
ITEM NO. |
FEATURES |
THR1100A/s3 |
1 |
Technology |
Microprocessor Based Digitally Controlled Pulse Induction with Very Low Frequency and No Harmful Effects on Human Health |
2 |
Detection Zones |
3 |
3 |
LED Zone Indicator Lights On Side Panels |
No LEDs on Side Panels (Zone Display is on Control Unit) |
4 |
Separate Zone Sensitivity Setting Feature |
NO |
5 |
Throughput Rate (Detection Speed) |
30 Person/Minute |
6 |
Sensitivity level |
10 Levels / 246 Sub Sensitivity Settings |
7 |
Alarm Counter |
YES/5 digit |
8 |
Counter Incoming & Outgoing |
ONE WAY IN COUNTER (5 digit) |
9 |
Green/Red Bicolor Traffic Through LED Indication |
YES |
10 |
Tri-Color Metal Density Display Vu-Meter LED Bar Graph |
YES |
11 |
Auto Calibration |
YES |
12 |
Perform Self Test at Start Up and Continuously Check the System for Failures with Automatic Failure Display Function |
YES |
13 |
Environmental Magnetic Noise Level Display Feature |
YES |
14 |
Mechanical Lock for Menu Access |
NO 4 Digit PIN Code |
15 |
LCD |
4*20 Character |
16 |
IP Protection Level |
IP 20 (EN 60529) |
17 |
IR Pass Sensor ON/OFF Feature for continuously Active or Sensor Activated Detection Mode Selections |
Yes |
18 |
Automatic Sensitivity Selection for Target Metallic Objects (Smart Detector) |
No |
19 |
SCADA |
Yes (Simple Version / Enabling Remote Access to Settings only via a remote PC up to 100 m cable connection) Software Optional |
20 |
Battery ON/OFF feature enabling Operation Without Mains / 2 hrs Continuous Operation Against Electricity Cut Offs |
No |
21 |
Battery Operation LED indicator on Control Unit |
No |
22 |
Automatically Shut Down the WTMD to prevent battery from deep discharge |
No |
23 |
Relay Output |
Yes |
24 |
Real-Time Video Prosecution Unit |
No |
25 |
IRDA (Pilot) Remote Control Unit |
No |
26 |
Audio/Visual Alarm Range |
2 meter |
27 |
Automatic Frequency Selection Feature for Interference Free Operation of Multiple WTMDs |
YES |
28 |
Interference free operation |
10cm distance constant metal / 150cm distance moving metallic object |
29 |
Ambient Temperature |
-20'C to 50'C |
30 |
Weight |
51Kg |
Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5Standard and produced under ISO 9001: 2008 QMS (Chinese Metal Detectors comply their own National Norms Only)
• We do not use China Made Production Input. (Chinese Equipment Sockets/Connectors and Electronic Circuitry is rather low quality and in most cases Exporter/Manufacturer and the Model Number Serial No is not even Clear and probably without a proper User’s Manual)
• Certified Safe regarding Electromagnetic Field-EMC, IP Protection Levels, International Health and Safety Norms (Far East Equipment’ Certification could be Potato Stamp)
• No Set Up Change is Necessary regarding Winter/Summer Seasonal Adjustments and Resistant to Vibration & Impact (Far Eastequipment my require Adjustments as per Temperature Changes)
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
• Give Alarm to all threat objects detected at different Alarm Zones. (Chinese equipment detects the Largest Threat Objects while others are not detected at the same time)
• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
• No Interferences between Zones and No False Alarms (Chinese equipment does not operate like this once detect and then not)
• Multi-Zone - 3 Detection Zones (Left/Middle/Right)v
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• 10 sensitivity levels, 246 adjustable sensitivity steps at each
• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media (Certification with Chinese Equipment should be carefully checked)
• Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
• Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.
• Five Digit Incoming Counter (Visible/Invisible)
• IR Pass Sensor ON/OFF Selection
• Four-digit changeable digital Pin Code
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• Reloading the factory default settings by one-touch button
• Easy programming and monitoring with wide LCD display
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• IP 20 Protection Level (EN 60529)
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
• Audio-Visual alarms are noticeable at a range of 2 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.v
• In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations.
• Weight: 51 kg
• Gross weight: 60 kg
• Operating voltage:70VAC – 270VAC / 50Hz - 60Hz
• Power: 10W Stand By- 20W (Alarm)
• Package Dimensions (W x H x L): Box 1: 560 x225 x 2270 mm Box 2: 225 x 235 x 790 mm
• Ambient Temperature: -20°C to +70°